What are 10 common problems with vapes and their solutions guiding you from beginner to experienced vaper

Here are 10 common problems with vapes and their solutions, guiding you from beginner to experienced vaper.

1. Why is my vape leaking vape juice?

A: This may be due to a loose atomizer or pod cartridge, a cracked seal in the seal chamber, or the installation of the atomizer seal not being restored. Also, low-quality atomizers may have poor sealing quality. Additionally, DIY atomizers may leak oil due to insufficient cotton.

2. Why does sometimes “pop”?

A: This may be because the heating wire is too close to the air outlet, causing some e-liquid to be directly sucked up without being vaporized due to capillary effect. Simply recheck the position of the heating wire and adjust the distance between the cotton and the air inlet to solve this issue.

Wanna buy the e-cigarettes and accessories free shipping, click the button below or https://www.vapecigcbd.com/


3. Why did my clear tank crack and is there a way to fix it?

A: The clear tank refers to the oil storage tank in a storage-style atomizer made of acrylic or PC material. If the size does not conform to the standard, it may crack due to thermal expansion and contraction. After cracking, it cannot be easily repaired and needs to be replaced. High VG e-liquid may also cause cracks in acrylic tanks.

4. What is a short circuit in the atomizer, and is it dangerous?

A: There are positive and negative poles at the bottom of the atomizer, and T-shaped rubber or silicone materials are generally used as insulation materials. Short circuits refer to the situation where the current does not pass through the heating wire, but rather creates a short circuit at the bottom. If the device has a scheme version, it is not dangerous, but the short circuit is very dangerous for mechanical devices (sticks or boxes). Check as soon as possible, and do not use if not working, so as to clearly identify the issue.

5. What are single and dual coils, and what are the benefits?

A: Single and dual coils refer to the number of heating wires installed in the atomizer. By increasing the number of heating wires, the contact area of the heating wire during the vaporization process of the e-liquid can be changed, resulting in larger amounts of vapor. If you are not familiar with the relevant knowledge of resistance and voltage, it is recommended to start with a single coil.

6. What are the benefits of dripping atomizers?

A: Dripping atomizers generally use low resistance and high power output. Low resistance instantly generates a large amount of heat energy, requiring a large amount of e-liquid to evaporate. The e-liquid is directly dripped onto the cotton on the heating wire, making it the most effective and quickest oil guide method. The huge amount of smoke also makes some e-liquid’s flavors reach the ultimate taste, becoming the final choice for advanced players. However, the drawbacks of dripping atomizers are also obvious: they require strong hands-on abilities and professional knowledge, and consume e-liquid at a fast pace. For novice players, it is recommended to start with pre-made atomizers and DIY storage atomizers.

Question 7: Which is better, a stainless steel tank, a glass tank, or an acrylic tank?

The materials used for the oil storage tank of an atomizer each have their own advantages and disadvantages. A stainless steel tank is sturdy and elegant, but it can only rely on taste and experience to judge the consumption of e-liquid in the tank. A glass tank is fragile, but it is very intuitive to see how much e-liquid is left in the tank. An acrylic tank is easy to install and has a higher e-liquid capacity than the other two tanks in some atomizers. However, it has the disadvantage of being fragile. Most importantly, an acrylic tank is not suitable for all e-liquids, as e-liquids with high vegetable glycerin (VG) content may cause the acrylic to crack.

Question 8: Will the XXX atomizer burn the cotton wick?

Any atomizer can burn the wick. The difference lies in the insufficient experience of beginners, which may cause the cotton wick to be set too tightly or too far from the oil inlet, resulting in poor oil supply and causing the cotton to dry out and burn. It may also be due to too much initial power, which brings too much heat to the heating wire and instantly burns the surface of the cotton wick, resulting in a burnt wick.

Question 9: How do you use a dripping atomizer?

The dripping atomizer has a simple structure, is easy to disassemble, produces a large amount of vapor, and has a large number of loyal fans. It involves dropping e-liquid directly onto the cotton wick on the heating wire, vaporizing the e-liquid with the instantaneous high heat of the wire, and releasing a large amount of vapor. To achieve the ultimate effect, dripping atomizer users usually set up multiple heating wires. Experience and skills are required when installing the wires. The more heating wires there are, the more voltage and resistance are involved. It is necessary to have an in-depth understanding of the dripping equipment before making a choice.

Question 10: Why does the dripping atomizer get hot?

Generally, the dripping atomizer is much shorter than an oil storage atomizer or a finished atomizer, and the heat output is high. During continuous smoking, the heating wire has not completely cooled down before ignition, resulting in an accumulation of heat, which is completely normal. However, for users who install multiple heating wires, it is necessary to carefully check whether there is a short circuit between the connecting feet of the wires before closing the atomizer.

Leave a Reply

Your email address will not be published. Required fields are marked *